5DOF electromagnetic sensor for position and orientation determination
- 5 degrees of freedom
- High stability and sensitivity
- Highly customizable solution
- Best isotropic/size performance
- RoHS and REACH compliant
This sensor provides position and orientation data in five degrees of freedom (5DOF): three translation values on the x, y and z-axes and any two of the three rotation values roll, pitch and yaw. It is designed for integrating into applications that require small sensors. The sensor is completely potted into a thin-walled, yellow-transparent PI-tube.
Reference Drawing
| Model | OD (mm) | L(mm) | Inductance(mH) | Resistance(Ω) | LWIRE(m) | ODWIRE(mm) |
| DES5D35-4060 | 0.42±0.03 | 6.2±0.3 | 3.0±10% | 105±20% | 2.0±0.05 | 0.16±0.02 |
| DES5D33-3310 | 0.33 Max | 10 Max | 3.3±15% | 105±10% | 2.0±0.05 | 0.16±0.02 |
| DES5D14-4545 | 0.42±0.03 | 4.5±0.3 | 1.4±15% | 80±10 | 2.5±0.05 | 0.16±0.02 |
| DES5D04-3325 | 0.33 Max | 2.5±0.3 | 0.4±15% | 95±10 | 2.0±0.05 | 0.16±0.02 |
*Consult factory for customization
Operating and Storage conditions
The sensor assembly will operate in an ambient temperature range of 10℃ to 30℃, and 30-75%RH. The sensor should be stored at temperatures between 0℃ to 50℃，and dry clean air atmospheric conditions.
6DOF electromagnetic sensor for position and orientation determination
- 6 degrees of freedom
- High stability and sensitivity
- Highly customizable solution
- Best isotropic/size performance
- RoHS and REACH compliant
This sensor provides position and orientation data in five degrees of freedom (6DOF):three translation values on the x, y and z-axes and all of the three rotation values roll, pitch and yaw.It is designed for integrating into applications that require small sensors.
Reference Drawing
Model Specification
| Model | OD (mm) | L(mm) | Inductance(mH) | Resistance(Ω) | LWIRE(mm) |
| DES6D35-9565 | 0.93±0.03 | 6.5±0.3 | 3.5±10% | 105±20% | 2000±50 |
*Consult factory for customization
Sensor Wiring
| Axis Direction | Sensor Wiring |
| Positive z-axis pointing away from the sensor lead wires | Connect the natural wire to tool connector “1 sensor +” |
| Connect the green wire to tool connector “1 sensor –“ | |
| Connect the red wire to tool connector “2 sensor +” | |
| Connect the blue wire to tool connector “2 sensor –“ | |
| Connect the green wire to tool connector “1 sensor +” | |
| Connect the natural wire to tool connector “1 sensor –“ | |
| Connect the blue wire to tool connector “2 sensor +” | |
| Connect the red wire to tool connector “2 sensor –“ |
Operating and Storage conditions
The sensor assembly will operate in an ambient temperature range of 10℃ to 30℃, and 30-75%RH. The sensor should be stored at temperatures between 0℃ to 50℃，and dry clean air atmospheric conditions.