戴圣思logo_web

5DOF electromagnetic sensor for position and orientation determination

  • 5 degrees of freedom
  • High stability and sensitivity
  • Highly customizable solution
  • Best isotropic/size performance
  • RoHS and REACH compliant

This sensor provides position and orientation data in five degrees of freedom (5DOF): three translation values on the x, y and z-axes and any two of the three rotation values roll, pitch and yaw. It is designed for integrating into applications that require small sensors. The sensor is completely potted into a thin-walled, yellow-transparent PI-tube.

Reference Drawing

Model OD (mm) L(mm) Inductance(mH) Resistance(Ω) LWIRE(m) ODWIRE(mm)
DES5D35-4060 0.42±0.03 6.2±0.3 3.0±10% 105±20% 2.0±0.05 0.16±0.02
DES5D33-3310 0.33 Max 10 Max 3.3±15% 105±10% 2.0±0.05 0.16±0.02
DES5D14-4545 0.42±0.03 4.5±0.3 1.4±15% 80±10 2.5±0.05 0.16±0.02
DES5D04-3325 0.33 Max 2.5±0.3 0.4±15% 95±10 2.0±0.05 0.16±0.02

*Consult factory for customization

Operating and Storage conditions

The sensor assembly will operate in an ambient temperature range of 10℃ to 30℃, and 30-75%RH. The sensor should be stored at temperatures between 0℃ to 50℃,and dry clean air atmospheric conditions.

6DOF electromagnetic sensor for position and orientation determination

  • 6 degrees of freedom
  • High stability and sensitivity
  • Highly customizable solution
  • Best isotropic/size performance
  • RoHS and REACH compliant

This sensor provides position and orientation data in five degrees of freedom (6DOF):three translation values on the x, y and z-axes and all of the three rotation values roll, pitch and yaw.It is designed for integrating into applications that require small sensors.

Reference Drawing

Model Specification

Model OD (mm) L(mm) Inductance(mH) Resistance(Ω) LWIRE(mm)
DES6D35-9565 0.93±0.03 6.5±0.3 3.5±10% 105±20% 2000±50

*Consult factory for customization

Sensor Wiring

Axis Direction Sensor Wiring
Positive z-axis pointing away from the sensor lead wires Connect the natural wire to tool connector “1 sensor +”
Connect the green wire to tool connector “1 sensor –“
Connect the red wire to tool connector “2 sensor +”
Connect the blue wire to tool connector “2 sensor –“
Connect the green wire to tool connector “1 sensor +”
Connect the natural wire to tool connector “1 sensor –“
Connect the blue wire to tool connector “2 sensor +”
Connect the red wire to tool connector “2 sensor –“

Operating and Storage conditions

The sensor assembly will operate in an ambient temperature range of 10℃ to 30℃, and 30-75%RH. The sensor should be stored at temperatures between 0℃ to 50℃,and dry clean air atmospheric conditions.

上部へスクロール